បកប្រែភាសា

Sunday, November 10, 2013

Samsung Galaxy S3 Secret Codes

Testing and Information
*#*#4636#*#*
View IMEI
*#06#
View SW Version PDA CSC, MODEM
*#1234#
Service Mode
*#197328640#
ADC Reading
*#0228#
Vibrate Motor Test Mode
*#0842#
Real Time Clock Test
*#0782#
Diagnostic ConfiguratioN
*#9090#
USB I2C Mode Control
*#7284#
Audio Loopback Control
*#0283#
System Dump Mode
*#9900#
Factory Reset
*#7780#
TSP / TSK firmware update
*#2663#
Remap Shutdown to End Call TSK
*#7594#
Quick Test Menu
*#7353#
Sellout SMS
*27674387264636#
VSC/MMI Codes
*#30# — status of incoming caller ID
*#31# — status of outgoing caller ID
*#35# — status of incoming SMS
*#351# — status of Incoming SMS If Roaming.
*#33# — status of Outgoing SMS
*#331# — status of Outgoing International SMS
*#43# — status of call waiting
*#21# — status Unconditional Call Forwarding
*#002# — status all Conditional Call Forwarding
*#004# — status Conditional Call Forwarding (busy, no answer, unavail)
*#61# — status of forwarding when no answer
*#62# — status of forwarding when not reachable
*#62# — status of forwarding when busy
*xx# — enables feature
**xx# — register and activate feature
*#xx# — check status of feature
#xx# — cancels feature

MT15i v2.3.4 Stock Firmware

Sony Ericsson MT15i
Download: MT15i_4.0.2.A.0.42_Global.7z

LG Optimus G Pro F240K, L, S Jelly Bean 4.1.2 [KDZ]

LG Optimus G Pro
F240K = F240K10o_00.kdz
F240L = F240L10t_00.kdz
F240S = F240S10r_00.kdz

LG Optimus L3 E400 Hard Reset

1. Phone Is Turn Off
2. Press And Hold The Home Key + Volume Down Key + Power Key For Over 10 Seconds.
3. When The Screen Show The LG Logo,
4. Release The Power Key.
5. After The Screen Shows The Hard Reset Screen,
6. Release The Other Keys.
7. Leave Your Phone For At Least A Minute While It Performs The Hard Reset,
8. Then Your Phone Will Be Turned On.

root M340K (Galaxy M Style)

Samsung_Galaxy_M_Style_Android_phone
ដោយគ្រាន់តែនេះជាវិធី root តែប៉ុណ្ណោះតែអ្វីផ្សេងៗដូច​ជា Modem និង recovery គឺប្រើរបស់ចាស់ដែលមានស្រាប់ហើយ។ វាធ្វើងាយៗតាម Odin គឺ៖
  1. ទាញយក Odin
  2. ទាញយក​ rooted-firmware និងពន្លា
  3. តម្លើង USB driver (បើសិនមិនទាន់មាន)
  4. បិទទូរស័ព្ទ
  5. បើកទូរស័ព្ទ​ចូលក្នុង download mode (Volume Down + Home button + Power button)
  6. ចុចប៊ូតុង PDA នៅលើ Odin
  7. ជ្រើនយក firmware ដែលបានពន្លា (m340k.tar.md5)
  8. ចុច​ប៊ូតុង start
បើសិន​ជាទូរស័ព្ទ​នៅតែគាំងត្រឹម​ Samsung សូម​ធ្វើតាមវិធីខាងក្រោម៖
  1. បិទទូរស័ព្ទ
  2. បើកទូរស័ព្ទចូលក្នុង recovery (Volume Up+ Home button + Power button)
  3. ជ្រើសយក wipe data/factory data reset
  4. reboot
  5. នោះទូរស័ព្ទ​នឹង​អាចបើកវិញដូចធម្មតា ហើយមាន root មកស្រេចនៅដដែល

Galaxy S4 (GT-I9500) Exynos Octa-Core ទទួលបានកំណែ Android 4.3

android-4.3-galaxy-s41
បន្ទាប់ពីSamsung ទើបតែបានបញ្ចេញនូវ Android 4.3 កាលពីប៉ុន្មានសប្ហាហ៍មុននេះនៅលើ GT-I9505 ដំណើរការនៅលើ Snapdragon 600នោះ ពេលនេះ Android ជំនាន់ចុងក្រោយបំផុតរបស់ Android ផ្តើមវត្តមានរបស់ខ្លួននៅលើ Galaxy S4 GT-I9500 ដែលប្រើប្រាស់ Exynos ថែមទៀត។
ប្រទេសដែលនឹងទទួលបាននូវកំណែថ្មីនេះមុនគេនោះ គឺចាប់ផ្តើមពីនៅឥណ្ឌា និងឥណ្ឌូណេស៊ី។ ចំនែកប្រទេសផ្សេងៗទៀតនឹងទទួលបានកំណែថ្មីនេះជាបន្តបន្ទាប់។ អ្វីដែលថ្មី ចំពោះកំណែថ្មីនេះក៏មិនខុសគ្នាទៅនឹងអ្វីដែលបានចេញរួចមកហើយនៅលើ GT-I9505 ។ ចំនុចសំខាន់ៗមានដូចជា៖
  • ប្រើជាមួយ Open GL 3.0
  • ប្រើជាមួយ Galaxy Gear បាន
  • បង្កើនល្បឿនកាន់តែលឿនជាមុន
  • មាន Samsung Wallet
  • កែប្រែការប្រើប្រាស់ RAM
  • browser ថ្មី
  • កាមេរ៉ា firmware ថ្មី
  • ប្រើប្រាស់ Keyboard ថ្មី
  • ចំនុច​ជាច្រើនតូចៗទៀត
យើង​អាច​បន្ទាន់សម័យ​ទៅកាន់ជំនាន់នេះ​តាមរយៈ Odin បាន​បើសិនជាមិន​អាច​រង់ចាំបានតាមរយៈ OTA នោះទេ។

ទាញយក XXV-I9500XXUEMJ5-20131021111245.zip

Root Galaxy S3 4.3 Official + Install CWM + Khmer

For Samsung Galaxy S3 (I9300) running Android JellyBean 4.3

The steps will guide you to:
Root; install BusyBox and ClockworkMod recovery for your GS3 4.3.


Successful tested on my own Galasxy S3.

Do understand, however, I cannot take any responsibility for any damage or brick to your device as a result of following these instructions. DO IT AT YOUR OWN RISK!


-----------------------------------------------------------------


*** Pre-requisites ***

1. USB Driver for GS3 (It should be installed already if you have Samsung Kies on PC)

2. Enable USB Debugging Mode on the phone (Menu => Settings. In "More" section, select "Developer options" => Tick "USB debugging")

3. Should have more than 80% of batery power.


-----------------------------------------------------------------


Steps to root:

1. + Download and extract CF-Auto-Root-m0-m0xx-gti9300.zip
    http://goo.gl/mYBf3

2. + Power off your GS3.

    + Boot into Download Mode. (By pressing and holding Volume Down & Home buttons together, then press the Power button untill an a "Warning!!" message  appears, then press Volume Up to continue).

3. In CF-Auto Root folder, run Odin3-v1.85.exe as an Administrator.

4. + Connect the GS3 to computer using USB cable while it is in the Download Mode.

    + Wait a second until Odin detects your device.

    + Click on PDA button and select the CF-Auto-Root-m0-m0xx-gti9300.tar.md5 file.

    + Click Start

    *** See screenshot: https://dropbox.com/s/2iehcb8gln2li3e/CF-Auto%20Root.png

5. Click the Start button in Odin. The installation process should begin now and would take few minutes to complete.

Once the installation process is completed, the phone will restart automatically. You will see SupperSU app in your phone.


-----------------------------------------------------------------


Install BusyBox & ClockworkMod Recovery (CWM) on your phone:

1. + Download "BusyBox Installer" from PlayStore.
       (Why install this? Becuase several root apps need it.)
       https://play.google.com/store/apps/details?id=com.jrummy.busybox.installer

    + Open BusyBox and press "Install". (Now you can uninstall BusyBox app if you want)

2. + Download "ROM Manager" from PlayStore.
       https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager

   + Open ROM Manager and select Recovery Setup, then install ClockworkMod recovery.

*** To boot into CWM recovery mode:
   + Power off your phone
   + Pressing and holding Volume Up & Home buttons, then Power on.


-----------------------------------------------------------------


Install Khmer Unicode & Keyboard

1. Download Khmer Unicode fonts. (Flash the zip file via CWM recovery)
https://www.dropbox.com/s/kc3aau1da3i940n/SHMAXX-JELLYBEAN-V4.4.zip

2. Khandroid Khmer Keyboard. (Install APK file as normal app)
https://www.dropbox.com/s/ipxoflthsmzuy1m/Khandroid_Keyboard_v2.0.apk